C0182 OBD Code

C0182 = Chassis Code (Problem is controller area network wiring bus and modules.)

82 is the final two digits are numbers that relate to the specific fault description, and there is no pre-approved key to help decode these final two digits.

C0182 OBD Code Description :

C0182 Structure Identification

C refer to the chassis category, which deals with areas outside the passenger compartment. It covers functionalities, such as brakes, suspension, steering, and mechanical systems.
0 RF Wheel Speed Circuit Malfunction
1 RF Wheel Speed Signal Missing
8 Level Control Exhaust Valve Circuit Malfunction
2 Code C1291 Set in Previous Ignition Cycle

Possible Causes

  • ECU has failed
  • EVAP canister has a leak or a poor seal
  • HO2S signal circuit shorted to ground or to system voltage
  • Injector 5 connector is damaged, open or shorted

How is the C0182 code repair?

For repair process you can do it yourself or take the car to auto repair shop , it will charge between $50 and $150 per hour.

Before starting repair process please check the 4 possible causes and to diagnose the C0182 obd2 code nearly half an hour labor time.

OBD2 Code Structure

First unit identifies the type of obd error code:

Pxxxx for powertrain
Bxxxx for body
Cxxxx for chassis
Uxxxx for class 2 network

Second digit shows whether the code is manufacturer unique or not:

x0xxx for government-required code
x1xxx for manufacturer-specific code

Third digit shows us what system the trouble code references:

xx1xx/xx2xx show air and fuel measurements
xx3xx shows ignition system
xx4xx shows emissions systems
xx5xx references speed/idle control
xx6xx deals with computer systems
xx7xx/xx8xx involve the transmission
xx9xx notates input/output signals and controls

Digits four and five show the specific failure code.

xxx00 to xxx99 - these are based on the systems defined in the third digit.

About | Contact | Privacy

Copyright © 2020 All rights reserved.

OBD Code